Epoxy Dispenser
.
Automatic Loading & Unloading, use tray to put material.
Pre-drain function to discharge the unstable amount of glue in the front needle.
The module uses PR positioning, CCD aligned XY, calculates the offset and expansion and contraction, and corrects the lower needle position.
Factory source pressure detection.
The vacuum disc uses 10 groups of solenoid valves, perceive and detect if there have enough material.
No. | Project | SPEC |
1 | Size | W：1600mm / D：1100mm / H：1700mm ( without electric control box and warning light ) |
2 | Control system | windows /17inches LCD monitor |
3 | Integrated in PC | |
4 | Voltage | Single-Phase AC 50/60HZ 200~240V±10% 1600W |
5 | Pressure source | 5Kgf/c㎡－30 litter/min |
6 | Import, Export mechanism | Automatic feeding and discharging (Four Buffer) |
7 | Track mode | Single track |
8 | X / Y / Z Maximum Move stroke | X:200 mm / Y:250mm / Z:50mm |
9 | CCD | CCD1 : PR positioning |
10 | Clean up residual glue | Vacuum suction and clearing module |
11 | Frame width | 160 mm |
12 | Frame length | 230 mm |
13 | Pre-spitting platform | Removable |
14 | Dispensing path | Dots, lines, circles, coatings, multiple irregular paths |
15 | Dispensing accuracy | ± 0.02 mm |
16 | Dispensing module | 8 pin pneumatic |